SINGLE HELIX CYLINDRICAL DESIGNS

Union City Filament’s most fundamental filament and heater designs are single helix cylindrically configured coils. These designs are used by a very wide variety of industries including the healthcare and medical device industry, electron device industry, the scientific and analytical sensor industry, and the semiconductor industry. These heaters and filaments consist of single wire coils wound on cylindrical mandrels for a specified number of turns at a specified pitch. Leg formations, coil diameters, and wire diameters can be modified to meet application requirements.

Material types functional in these configurations range all Union City Filament standard material types. Single helix cylindrically designed coils are available coated in one of our alumina coatings.

SINGLE HELIX CYLINDRICAL PRODUCTS

Single Helix Filament with legs formed perpendicular to the coil axis. Most commonly used in X-Ray Tubes.
See Drawing

UCF-SK001

Single Helix Filament with legs formed outward and then perpendicular to the coil axis. Most commonly used in X-Ray Tubes.
See Drawing

UCF-SK002

Single Helix Filament with legs formed perpendicular to the coil axis and then parallel to the coil axis. Most commonly used in Scientific Instruments.
See Drawing

UCF-SK003

Single Helix Filament with legs formed perpendicular to the coil axis, 180 degrees apart. Most commonly used in Scientific Research Applications.
See Drawing

UCF-SK004

Single Helix Filament with legs formed parallel to the coil axis. Most commonly used in Mass Spectrometers.
See Drawing

UCF-SK005

Single Helix Filament with legs formed parallel to the coil axis. Most commonly used in Scientific Instruments and Ionization Gauges.
See Drawing

UCF-SK006

Single Helix Filament with tapered, variable pitch turns. Most commonly used in Microwave Tubes.
See Drawing

UCF-SK007

Single Helix Filament with one leg formed to the center of the coil. Shown with HC-93 coating. Most commonly used in Microwave Tubes.
See Drawing

UCF-SK008

Single Helix Filament with both legs formed to the center of the coil. Shown with Alumina Coating. Most commonly used in Microwave Tubes and Scientific Research Applications.
See Drawing

UCF-SK009

Pigtail Filament with legs formed perpendicular to the coil axis. Most commonly used in Ion Implanters.
See Drawing

UCF-SK010

Pigtail Filament with legs formed parallel to the coil axis. Most commonly used in Ion Implanters.
See Drawing

UCF-SK011

Single Helix Filament with no legs. Ends can be closed. Most commonly used as a High-Temperature Spring.
See Drawing

UCF-SK012

Single Helix Filament with no legs. Most commonly used as a High-Temperature Spring and in Microwave Tubes.
See Drawing

UCF-SK013

Single Helix Filament with no legs. Shown with ground ends. Most commonly used as a High-Temperature Spring and in Microwave Tubes.
See Drawing

UCF-SK014

SINGLE HELIX CYLINDRICAL INQUIRY

CONTACT US